RefleX D438 UV Disinfection Chambers
For ultrapure water disinfection and ozone destruction
RefleX D438 UV Disinfection Chambers
An essential component in advanced oxidation processes and water disinfection, RefleX UV Chambers use patented technology to reflect 99.8% of 254 nm UV generated back into the chamber flow.
With a 75% smaller footprint than standard UV systems and two 38” high-output lamps, RefleX D438 UV Chambers provide highly efficient performance with the lowest cost service schedule of any low or medium pressure UV system available.
Take command of more in less space.
RefleX Controllers provide the information you need at a glance – with the ability to control up to four treatment chambers independently from a simple menu.
-
Compact footprint
-
Vertical or horizontal mount
-
Fewer lamps
-
Up to 75% less energy use
-
120V or 230V single phase power
-
No flow, no problem
-
Real-time dosimetry
-
NSF 50 and NSF 61 certification
-
No-tool lamp change
-
TUV safety certified
Control up to four chambers
from a tidy 8X9X4” footprint.
Flow Rate:
375 (85.1) gpm (m3/hr.)
95% UVT @ 40mJ/cm2^
Lamps:
Two high-output
amalgam lamps
Power:
303 watts with
control box
Maximum UV Penetration
RefleX D438 UV Chambers provide a remarkable level of engineering sophistication to maximize UV reflectivity and UV distribution. Patented chamber technology reflects over 99% of UV light back into the water.
This unique technical advantage also reduces the number of lamps and power requirements by up to 90% compared to standard UV systems.
Minimal Maintenance and Service
RefleX D438 UV Chambers have three basic maintenance requirements:
Lamp: Convenient, dry and tool-less replacement
UV Monitor: Convenient, dry, and only four screws to remove
Cleaning: As needed in a CIP loop or manually brushed.
Get all the specs
Everything you need to know
Let us help size
your system
solution
Start smart
Water Analysis and Pilot Programs
Get expert advice
Market Applications:
Pharmaceutical
Microelectronics
Medical
Remediation
Beverage
Commercial/Industrial
Pool/Spa
Waste Water
Drinking Water
AOP
Specifications:
^ At rated pressure drop.
* Lamp life is based on a maximum of one on-off cycle per day and room temperature water.
+ All units come standard with sanitary tri -clamp fittings for improved reliability, sanitation, and ease of
installation. Alternative connections are available upon request.
Unparalleled Efficiency.
With the smallest footprint in its class, RefleX D438 UV Chambers use as few as one tenth as many bulbs compared to standard UV systems – for the lowest operating and maintenance cost schedule available.
Options and Spares:
Higher reflectivity for higher transmissivity.
The UV transmissivity (UVT) of the treated water, combined with the flow rate
through the unit, determine the UV dosage applied to the water. Particles in
water typically absorb or reflect UV light which affects the water’s UV transmissivity.
RefleX UV Chambers are rated based on a UVT of 95%. The above graphs illustrate the appropriate rating for the D438 based on varying UVT levels. Our technical team provides complimentary UVT analysis of supplied water samples to ensure proper UV equipment sizing.